Troubleshoot irrevocable leases

Introduction

Vault creates leases for both dynamic secrets and service tokens, and it maintains the lifecycle of those leases with an internal system called the expiration manager.

The expiration manager handles the revocation of leases when they reach their specified time to live value.

Certain problems can prevent Vault from revoking a lease. For example, leases on secrets issued from a dynamic secrets engine can become irrevocable if Vault cannot communicate with the server configured in the secrets engine.

Challenge

Irrevocable leases accumulate over time and can cause degraded performance at critical stages of Vault operations, such as during startup or when the server assumes active cluster leadership.

Before Vault version 1.8.0, the server would try to revoke all expired leases at once during startup. With the accumulation of tens of thousands of irrevocable leases request handling can become degraded when the expiration manager is attempting revocation.

Solution

Vault 1.8.0 introduced enhanced expiration manager functionality to internally mark leases as irrevocable after 6 failed attempts at revocation.

This provides a way to stop attempting revocation on leases identified as irrevocable.

An HTTP API and CLI command are also available to assist operators in identifying irrevocable leases.

Example scenario

You can follow the example scenario in this tutorial to learn more about Vault lease handling and troubleshooting irrevocable leases.

Prerequisites

To perform the steps in this tutorial, you need:

• Docker Desktop
• Extra configuration from the learn-vault-lease-lab repository

Scenario introduction

The example scenario runs in a Docker environment. You will create a Docker network, and run a Vault dev mode server container. The scenario script will create the PostgreSQL container, configure the secrets engine, and create a dynamic credential with leases. This saves time so that you can focus on interpreting log output, and using the new API and CLI functionality.

Scenario environment setup

Before you can explore the scenarios, you need to prepare the environment.

First, define a learn-vault Docker network.

$ docker network create --attachable --subnet 10.42.74.0/24 learn-vault

Start a Vault dev mode container.

$ docker run \
    --name learn-vault \
    --publish 8200:8200 \
    --ip 10.42.74.100 \
    --network learn-vault \
    --detach \
    --rm \
    vault server -dev -dev-root-token-id root

Export environment variables for communicating with the Vault dev mode container using the root token value.

$ export VAULT_ADDR=http://localhost:8200 VAULT_TOKEN=root

Look up your token to ensure that you can communicate with the Vault dev mode container.

$ vault token lookup | grep policies
policies            [root]

Now that the Vault container is ready, you can begin exploring the example lease revocation scenarios.

Retrieve the example scenario scripts by cloning or downloading the hashicorp-education/learn-vault-lease-lab repository from GitHub.

Clone the repository.

$ git clone https://github.com/hashicorp-education/learn-vault-lease-lab

Or download the repository.

This repository holds supporting content for all the Vault learn tutorials. The content specific to this tutorial resides in a sub-directory.

Change your working directory to learn-vault-lease-lab.

$ cd learn-vault-lease-lab

Explore problematic leases

Before you can begin to resolve issues with problematic leases, you should first learn how to identify situations in which Vault is unable to revoke leases.

In this scenario you will identify the appearance of successful and unsuccessful lease revocation entries in the Vault server log, along with identifying an irrevocable lease entry.

The example script starts a PostgreSQL container, configures the Vault container to connect to it, defines a role for creating dynamic credentials, and creates one dynamic credential.

Execute scenario script

Set the dynamic-postgres.sh file to executable.

$ chmod +x dynamic-postgres.sh

With the Vault server running, execute the script.

$ ./dynamic-postgres.sh
Start PostgreSQL container.
572094a9ad9b7d8dd500945f22e7ff5692c378f10ebb7ac1c5de2024f09ac474
.
Configure PostgreSQL secrets engine.
Success! Enabled the database secrets engine at: database/
Success! Data written to: database/roles/db-dba
Success! Uploaded policy: db-dba
Create PostgreSQL dynamic credential using DBA token.
Complete.

Explore successful lease revocation message

Wait over 1 minute for the TTL value on the 2 leases to expire, then check the Vault server logs.

$ docker logs 2>&1 learn-vault | grep revoked

You should find a log line indicating successful revocation of the 1 lease created by the script.

2021-07-27T10:52:23.083-0400 [INFO]  expiration: revoked lease: lease_id=database/creds/db-dba/3er4DsaHXUbkwj0lh5wDGroJ

The log entry shows that the expiration manager revoked the lease for the credential. Note that the lease_id entry has a prefix to indicate the secrets engine type (database) and has a reference to the role name (db-dba).

You are ready to examine a case where revocation is failing so you can understand how that situation appears in the server logs.

Explore unsuccessful lease revocation message

First, disable the database secrets engine that the script enabled. This will remove all associated configuration so that you can then reconfigure it with a second execution of the script.

$ vault secrets disable database
Success! Disabled the secrets engine (if it existed) at: database/

Then stop the PostgreSQL container.

$ docker stop learn-postgres

Execute the dynamic-postgres.sh script again, but this time stop the PostgreSQL container after the script execution completes.

$ ./dynamic-postgres.sh ; docker stop learn-postgres

By stopping the PostgreSQL container, you prevent Vault from connecting to it and revoking the lease when it reaches expiration.

Wait a minute for the TTL value on the leases to expire, then check the Vault server logs.

$ docker logs 2>&1 learn-vault | grep revoked

You should find an [ERROR] line indicating failure to revoke the lease.

2021-07-27T10:56:05.428-0400 [ERROR] expiration: failed to revoke lease: lease_id=database/creds/db-dba/k7yLujVyreaN8HWXNKnpWTz1 error="failed to revoke entry: resp: (*logical.Response)(nil) err: dial tcp [::1]:5432: connect: connection refused"

The information making up the lease_id value has details about the secrets engine type and role name.

Note also that there is an error message, which states that Vault failed to revoke the entry, with more detail provided in the response. In this case, Vault cannot connect to the PostgreSQL server at [::1]:5432 because you stopped the Docker container.

Since Vault cannot connect to PostgreSQL, it cannot issue the revocation statements required to revoke the credentials and associated lease.

Irrevocable lease behavior

When Vault encounters irrevocable leases, it behaves differently depending on the version in use.

• For versions before 1.8.0, Vault will always try to revoke all expired leases. This means that if you have a scenario like that which you just explored where the database server is unavailable, Vault will be periodically and indefinitely attempting connections with that server to revoke the credentials.

• For versions at or beyond 1.8.0, Vault will try to revoke an expired lease 6 times. If it fails to revoke the lease on the sixth try, it will internally mark the lease as irrevocable. You can identify such leases with the CLI.

For this scenario, after several minutes have elapsed, you can check the logs again to learn if the expiration manager has attempted to revoke the lease at least 6 times.

$ docker logs 2>&1 | grep 'failed to revoke lease' | wc -l
       6

Once you have observed that 6 revocation attempts have occurred and failed, use the vault CLI to report on the irrevocable leases.

$ vault read sys/leases/count type=irrevocable
Key            Value
---            -----
counts         map[database_23ec392d:1]
lease_count    1

The result is one irrevocable lease associated with the database secrets engine accessor 23ec392d.

Clean up irrevocable leases

You can clean up leases by revoking them based on their prefix.

In this case, the prefix corresponds to the path you have observed in the lease ID, database/creds/db-dba.

Try to revoke the irrevocable lease by its prefix.

$ vault write -force sys/leases/revoke-prefix/database/creds/db-dba

This fails with an error that is similar to the one logged when the expiration manager cannot revoke the lease.

Error writing data to sys/leases/revoke-prefix/database/creds/db-dba: Error making API request.

URL: PUT http://localhost:8200/v1/sys/leases/revoke-prefix/database/creds/db-dba
Code: 400. Errors:

* failed to revoke "database/creds/db-dba/k7yLujVyreaN8HWXNKnpWTz1" (1 / 1): failed to revoke entry: resp: (*logical.Response)(nil) err: dial tcp [::1]:5432: connect: connection refused

How can you clean up this irrevocable lease, then?

You can use the Revoke Force API, instead.

Try to forcibly revoke the lease.

$ vault write -force /sys/leases/revoke-force/database/creds/db-dba
Success! Data written to: sys/leases/revoke-force/database/creds/db-dba

Try to list irrevocable leases again, and you should find that the 1 lease has now been forcibly revoked.

$ vault read sys/leases/count type=irrevocable
Key            Value
---            -----
counts         map[]
lease_count    0

Token leases

You can confirm token revoked leases clean up by listing the path, and noting that leases are no longer found.

$ vault list sys/leases/lookup/auth/$PREFIX
No value found at sys/leases/lookup/auth/$PREFIX

Metrics

Besides exploring the Vault server logs for indications of lease revocation issues, there other key Vault telemetry metrics related to the expiration manager, which you can monitor and alert on.

Cleanup

Follow these steps to clean up your example scenario environment.

Stop the PostgreSQL and Vault containers.

$ docker stop learn-postgres learn-vault

Remove the Docker network

$  docker network rm learn-vault

Summary

You learned about the Vault expiration manager and lease handling behavior along with how to identify irrevocable leases, and resolve issues with them.

You also learned about some key Vault telemetry metrics related to the expiration manager and lease handling, which you can monitor and alert on.

Help and reference

• Leases
• Revoke Prefix API